My Awesome Pool

4" x 6"

https://www.amazon.com/dp/B0CP8W3TVB

12" x 16" https://www.amazon.com/dp/B0DF6C9QY8

Brass hot-melt / heat-set insert nut kit, 1450 pieces, sizes M2, M2.5, M3, and M4 in multiple lengths. Includes a 60W ESD-safe temperature-controlled soldering iron (110V–240V) with stand for installing the inserts into 3D prints or plastic. Made in China. Iron gets very hot — use with care.

BOVILEVR 1000-piece glasses and watch screws kit with assorted tiny screws, nuts, washers, and screw caps. Includes many common micro sizes (approx. 1.0–2.5 mm diameters and various lengths). Good for eyeglasses, watches, electronics, and other small repairs. Contains small parts.

Complete Japanese sharpening kit, lent as a set: • Shapton Kuromaku K0702 "Orange Medium" (commonly #1000) — sets and sharpens the edge • Shapton Kuromaku K0704 "Enji Fine" (commonly #5000) — refines • Shapton Kuromaku K0710 "Melon Fine" (commonly #8000) — final polish • Suihei-kun PA#100 flattening stone — trues the stones back to flat, never touches a blade The Shaptons are splash-and-go: a spritz of water, no soaking needed. Each stores in its own snap-shut case that doubles as a stand. The PA#100 does need a soak before use, and plenty of water while lapping. The flattening stone is included because whetstones dish out in the middle with use, and a dished stone makes a consistent angle impossible. Pencil-grid trick: scribble a crosshatch on the stone's face, take a few passes on the flattener, and any pencil left behind marks a low spot not yet reached. All made in Japan.

Chrome-moly impact-rated step-down adapter: 3/4 inch female to 1/2 inch male, with detent ball and pin hole. Lets you run 1/2 inch drive sockets off a 3/4 inch gun or breaker bar. Easy to overpower 1/2 inch sockets this way, so go gently on the trigger.

Chrome-moly impact-rated step-up adapter: 1/2 inch female to 3/4 inch male, with detent ball and pin hole. Lets you run 3/4 inch drive sockets off a 1/2 inch gun or ratchet. Mind the torque — stepping up doesn't give the smaller drive more muscle.

Black-oxide impact-rated socket, 1-1/2 inch, standard depth, with a retaining-pin hole. The kind of size you need for big suspension, trailer axle, or heavy equipment fasteners. Drive size isn't confirmed from the photo — ask before you make the trip if it matters.