SynergyMill

Magnetic Field Meter

with nunchuck

RW capable

Kenwood plug

With USB dongle

Pittsburgh

JACO brand

Bside HX1, 240×240

Miniware V1.1

- Round, 6x3mm - Round, 8x3mm - Round, 5x5mm - Bars, 20x5x2mm

https://www.amazon.com/dp/B095NMT2SL

1/4W +-5%

Specifications: Material: Aluminum Color: Black Packing: "PP" box Nominal Capacitance : 0.1uF-1000uF Capacitance Tolerance: electrolytic +/-20% Operating temperature range: -55~+105℃ Leakage current(20℃): Less than 0.01CrUr(uA) or 3uA Dissipation factor (120Hz 20℃): ≤20% Package included: 0.1uF 50V 4 x7 -------- 10Pcs 0.22uF 50V 5x11 -------- 10Pcs 0.47uF 50V 5x11 -------- 10Pcs 1uF 50V 5x11 -------- 10Pcs 2.2uF 50V 4x7 -------- 10Pcs 3.3uF 50V 4x5 -------- 10Pcs 4.7uF 50V 4x7 -------- 10Pcs 10uF 25V 4x7 -------- 10Pcs 10uF 50V 5x11 -------- 10Pcs 22uF 16V 4x7 -------- 10Pcs 22uF 25V 4x7 -------- 10Pcs 33uF 16V 4x7 -------- 10Pcs 47uF 10V 4x5 -------- 10Pcs 47uF 25V 5x11 -------- 10Pcs 47uF 50V 6x11 -------- 10Pcs 100uF 16V 5x11 -------- 10Pcs 100uF 25V 5x11 -------- 10Pcs 220uF 10V 5x11 -------- 10Pcs 220uF 25V 6x11 -------- 10Pcs 330uF 25V 8x12 -------- 10Pcs 470uF 10V 6x11 -------- 10Pcs 470uF 16V 8x12 -------- 10Pcs 680uF 16V 8x12 -------- 10Pcs 1000uF 16V 10x16 -------- 10Pcs https://www.amazon.com/dp/B07KC99W2K

Amazon Basics

Makes laminated edges round

Logitech X52 Pro

Turtle Beach

ANENG AN8002

Olympia Traveller de Luxe

LiPo/LiFe/LiIon/LIHV/NiMH/NiCd/Pb

16340/18650/26650/32650

Sky-Watcher Classic 200P

221-41x 221-61x plus some 2 ones

Fits the standard PETG tube nozzle

Connect USB-C devices to a USB-A port with this super convenient adapter. Unsure if USB 3.0 speeds are supported or USB 2.0 only. Trustworthy device with no malware embedded in the housing for sure, I think.

Rechargeable electric Scissors that can cut cloth, plastic sheet, soft material

https://www.samsclub.com/ip/Member-s-Mark-24-Can-Waterproof-Backpack-Cooler/17888307682

https://www.harborfreight.com/25-liter-ultrasonic-cleaner-63256.html

This will need to stay at home but I can print things if you need it!

(Attached to my light truck). If you need to tow something not too heavy, I can help

https://www.amazon.com/dp/B0F1Y41G14

Renogy https://www.amazon.com/dp/B0D3DZWXT4/

OneTigris https://www.amazon.com/dp/B0D4M15VB2

Modified Harbor Freight pressurized paint sprayer. It no longer will spray paint, but hook up your compressor, put your silicone molds filled with two-part urethane inside, batten down the hatches and start the air. Run it to about 60 psi and it should hold it for a few hours so your castings will come out bubble-free.

For adjusting the truss rod/neck relief after frets have been installed. Notches spaced for standard 34" scale length (Fender Precision/Jazz Bass, etc.). To save a few bucks I marked up a heavy aluminum T-square from Harbor Freight with a Sharpie and then attacked it with an angle grinder and sandpaper flap disk. Lives at Casa Del Gamp

This is on the lending shelf at SynergyMill

This is on the lending shelf at SynergyMill

This is on the lending shelf at SynergyMill

29.5 - 147.5 ft lbs